Internet radio doesn t work/maby it is just me

Pi MusicBox
1

i had installed on pi first version(1processor),it s hangs on .installed again with etcher on pi 2 b,again entering an adress,hanging on forever.
the testing adress wass http://protonradio.com:8000
nothing so far…

2

Going to need you to be more specific / write full sentences if possible. Where exactly did you enter that address? Can you provide the logs as the troubleshooting explains?

3

Hello king .on the main page on streams up the direction and down the name

4

i didn t find a solution of this issue //reinstalled twice -the same ,won t work
i have an usb adapter tp-link TL-WN722N

ssh working

5

i didn t find a solution of this issue //reinstalled twice -the same ,won t work
here is the log file

Initializing MusicBox…

Setting sound configuration…
Probing sound devices:
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]

Found internal device: card0
Found internal device: card0
Selected card= (i2s= output=auto usb= intc=0)
No output was specified/found, falling back to auto detection
Selected card=0 (i2s= output=analog usb= intc=0)
Using audio card0 (analog)
MusicBox name is ClassicR
ifup: interface wlan0 already configured
Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).
Reconfiguring network interfaces…Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/wlan0/50:3e:aa:79:e3:48
Sending on LPF/wlan0/50:3e:aa:79:e3:48
Sending on Socket/fallback
DHCPRELEASE on wlan0 to 192.168.1.1 port 67
Reloading /etc/samba/smb.conf: smbd only.
RTNETLINK answers: No such process
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit ISC DHCP - ISC

Listening on LPF/eth0/b8:27:eb:2c:99:7b
Sending on LPF/eth0/b8:27:eb:2c:99:7b
Sending on Socket/fallback
DHCPRELEASE on eth0 to 192.168.1.1 port 67
send_packet: Network is unreachable
send_packet: please consult README file regarding broadcast address.
Reloading /etc/samba/smb.conf: smbd only.
Error for wireless request “Set Power Management” (8B2C) :
SET failed on device wlan0 ; Operation not permitted.
ioctl[SIOCSIWAP]: Operation not permitted
ioctl[SIOCSIWENCODEEXT]: Invalid argument
ioctl[SIOCSIWENCODEEXT]: Invalid argument
ifup: interface wlan0 already configured
done.
Stopping Samba daemons: nmbd smbd.
Starting Samba daemons: nmbd smbd.
Starting Dropbear SSH server: dropbear.
Starting daemon monitor: monit.

My IP address is 192.168.1.46
Connect to me in your browser at http://ClassicR.local or http://192.168.1.46

ssh working

6

is working ,maby was the stream faulty?can i make an update and upgrade with sudo apt-get command ?

7

Nope. Not supported.

8

ok.Tkank you for fast replay,Cheers from Spain