Hello, I tried to install Pi Musicbox on my B+ with the HiFiBerry Digi+ module for some weeks now. I always get the same error and no sound over spdif or toslink: bcm2708-i2s bcm2708-i2s.0: I2S SYNC error! Here is what I did: I tried the latest stable Image of Pi Musicbox and also the Prerelease…

Aside from Mopidy, shairport is the other process possibly using the soundcard. You’d maybe need to comment out the bottom part of /etc/monit/monitrc to prevent monit from automatically restarting it once you kill it.

Rene, thank you for the hint. I read your post before (and a lot other posts, too) and I think I did it all the same way, you did. Except that I use the Digi+ instead of the Dac plus. So I set output = hifiberry_digi instead of hifiberry_dacplus. The strange thing is that the Digi+ was still ignored…

Shairport is disabled by default but I also removed it from the monitrc. Still no difference. Maybe there is some problem with my configuration: root@MusicBox:~# lsmod Module Size Used by iptable_filter 1485 1 xt_REDIRECT 1968 1 xt_tcpudp 211…

I have same issue. I previously used version 0.5 and with help of this thread I was able to listen through SPDIF. Can somebody to guide me how can I fix this in version 0.5.1rc2?

cannot test this, don’t have a Digi+…

Hi Wouter, the configuration of the Digi and Digi+ is the same. Both boards are based on the same hardware, only the form factor is different. Do you have a Digi? I can also provide a Digi+ to you if you want to test this. Best regards Daniel

I have this same issue as well. I noticed that as well as the sync error message, I was also getting ‘DMA transfer could not be terminated’ which would also prevent alsa force-reload from working once I had attempted to play any sound. The same error would crop up again during shutdown - I don’t r…

Hey this is how i got my Pi Musicbox on my B+ with the HiFiBerry Digi+ to work. Chose sound card HiFiBerry Digi restart it it won’t work directly. ssh into it ssh root@ip aplay -l check the card number of HiFiBerry Digi+ change asound.conf with the above card nummber nano /etc/asound.conf pcm.!…

Hi, This works! Changing the asound.conf did the trick. Is there someone who can make this work after a reboot? Or tell me the how to fix it. Maybe Wouter van Wijk himself? Please help! Musicbox is fantastic, but i need this digital output! Regards, Peter

HiFiBerry Digi+ / I2S SYNC error

Pi MusicBox (archive)

renekreijveld November 27, 2014, 2:13pm 2

Uwe, checkout this thread. Maybe this can help you: Will it run out-of-the-box on a RPI B+?

Topic		Replies	Views
MusicBox not playing via HifiBerry Digi Pi MusicBox (archive)	10	3295	January 14, 2019
Will it run out-of-the-box on a RPI B+? Pi MusicBox (archive)	8	4124	November 28, 2014
HiFi Berry DAC+ Pi MusicBox (archive)	6	7033	November 25, 2014
Try to get hifiberry_digi working Pi MusicBox (archive)	15	2611	October 21, 2019
Attached New HiFiBerry Dac+ but now MusicBox.local stopped working! Pi MusicBox (archive)	15	10160	May 27, 2016

HiFiBerry Digi+ / I2S SYNC error

Related topics