Hi, I was just about to buy some SONOS speakers when I found mopidy, which also gives new live to my collections of raspberry Pis, so I set everything up and after a bit I have now the MOPIDYSERVER running with IRIS and MUSICBOX, the SNAPSERVER and CLIENT on the RPi as well, I have SNAP.NET on my…

Did you run through the stuff at the bottom of Raspberry Pi — Mopidy 3.3.0 documentation including the step where you make sure your user audio settings match your system audio settings? Is this raspbian? Desktop? Lite?

I’ll also say its not clear from your post how snap client and snapserver fit into this. But you need to get a minimal mopidy setup and working first (no snapcast) and then add that.

Hey, thanks for checking my issues out. Yes, i can produce the sine wave sound and i can play individual files with aplay from command line. The system is a RPi3 with raspian 64bit lite. From the tutorials I saw all of them use snapcast to distribute mopidys music stream to the final output…

That guide you linked confused me, do you have output = alsasink and output = audioresample going at the same time in mopidy.conf? From what i understand you need in mopidy.conf an audio output solely to sort of what you posted output = audioresample ! audioconvert ! audio/x-raw,rate=48000,channel…

I set the output back to [audio] output = alsasink and i can clearly hear: aplay /usr/share/sounds/alsa/Front_Center.wav I have the feeling that it isnt the sound output. If i would just not hear anything, the player would still behave like its playing right? What im seeing is that nothing happe…

[image] kingosticks: including the step where you make sure your user audio settings match your system audio settings? Did you do this part?

Alright, I reinstalled everything fresh and went with a simpler tutorial. and now the player plays music locally on the pi. as soon as I switch the output from alsasink to `output = audioresample ! audioconvert ! audio/x-raw,rate=48000,channels=2,format=S16LE ! wavenc ! filesink location=/tmp/snapf…

thats good, lets make the snapcast work then! What took me some reading was the “tmp/snapfifo permission denied” error of snapserver. fixed by: sudo echo "fs.protected_fifos = 0" | sudo tee /etc/sysctl.d/snapcast-unprotect-fifo.conf other than that the above outlined steps should do it. let us s…

Here we go: pi@raspberrypi:~ $ sudo journalctl -u snapserver -- Journal begins at Thu 2022-09-22 05:17:24 CEST, ends at Wed 2022-10-12 16:01:41 CEST. -- Oct 11 05:07:47 raspberrypi systemd[1]: Started Snapcast server. Oct 11 05:07:47 raspberrypi snapserver[3387]: Version 0.26.0, revision e30a9f33 O…

so ill tried a bit more. tried to make hydraplay work which is an all in one solution for mopidy and snapcast. but that had its own issues. i tried it with ubuntu instead of rasbian, which also didnt work. is there any way i can test if snapserver receives the stream correctly? if i can play musi…

Everything is set up, but I hear nothing

Help and support

FlorianReiterer April 16, 2023, 10:48am 12

hi, if you like to try, i have made sd card images with a raspi 4 working snapcast system. It does not have all the extensions you were looking for, and the snapcast stream is set to 96k24bit; but you can flash two cards and try, it’s a full working multiroom system.

Topic		Replies	Views
Mopidy and Snapclient Spotify output Misc	7	3538	December 30, 2020
Stream from Mopidy to Mopidy Misc	11	1870	August 17, 2020
Mopidy/Iris + Snapcast: no audio Help and support	10	574	November 21, 2024
Raspberry PI freezes when I hit play http frontend Misc	6	750	November 15, 2020
Trouble setting up Mopidy on Raspberry Pi 4 Help and support	13	2024	April 9, 2021

Everything is set up, but I hear nothing

Related topics