# Using WIFI does not work / Raspberry Pi 3 Model B Rev 1.2 / Reconfiguring network interfaces…RTNETLINK answers: No such process

**URL:** <https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444>\
**Category:** Pi MusicBox (archive)\
**Created:** [April 23, 2018, 8:03pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444 "2018-04-23T20:03:37Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [April 23, 2018, 8:03pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/1 "2018-04-23T20:03:38Z")

</div>

Hi,  
latest RC is running on a Rasp 3. Cable Network works fine, but using the Wifi Network shows the message “ERR\_CONNECTION\_REFUSED” when loading the webpage.  
Ping works fine on Wifi IP, Firewall is not enabled on device.  
Any ideas?

Thanks in advance  
Andre

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [April 26, 2018, 8:52pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/2 "2018-04-26T20:52:01Z")

</div>

Hi there! Did I miss any information to put into within the last post? Or does no one has any idea to overcome this issue?  
Please let me know.  
Thank you  
Andre

---

<div class="post-metadata">

**Author:** ![kingosticks](https://avatars.discourse-cdn.com/v4/letter/k/858c86/32.png) [@kingosticks](https://discourse.mopidy.com/u/kingosticks)\
**Post date:** [April 26, 2018, 9:34pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/3 "2018-04-26T21:34:22Z")

</div>

Is it the onboard wifi? Can you provide the log at /var/log/musicbox\_startup.log ?

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [April 26, 2018, 9:38pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/4 "2018-04-26T21:38:48Z")

</div>

Hi! Yes it is the onboard wifi. I will upload the log-file tomorrow morning. Thanks in advance  
Best regards,  
Andre

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [April 30, 2018, 8:02pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/5 "2018-04-30T20:02:41Z")

</div>

Ok. I figured out, as soon I configure the Wifi the cable LAN only get IPv6 addresses and Wifi did not get anything. The log file I did not upload yet, because of the several tests I did to get closer to the issue.  
I will be back soon to deliver the log after doing the Wifi configurations.

best regards,  
Andre

---

<div class="post-metadata">

**Author:** ![kingosticks](https://avatars.discourse-cdn.com/v4/letter/k/858c86/32.png) [@kingosticks](https://discourse.mopidy.com/u/kingosticks)\
**Post date:** [May 1, 2018, 8:11am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/6 "2018-05-01T08:11:58Z")

</div>

So, are you trying to use WiFi and wired connections at the same time? Please do provide the log when you can.

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [May 10, 2018, 2:25pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/7 "2018-05-10T14:25:57Z")

</div>

Hi Nick,  
it took a while to find some free time to come back to this issue.  
First some more information: I’m using a Raspberry Pi 3 Model B Rev 1.2  
No further Hardware connected than an bluetooth device for keyboard and mouse. Onboard Sound and onboard WIFI.  
Installation process was

1. installing image, no configuration in settings.ini and network connected by wire.  
Result: everything works fine.
2. Running Webinterface works fine too und now I put in the WIFI information within the network section. Saved the settings, reboot the system and unpluged the network cable.Means: switch the network, not having both connected.
3. unfortunately the WIFI do NOT come up. My WIFI settings are WEP/WEP2 secured and the password does have 64 character. Any other Devices are working fine in wireless network and the Raspberry HW running Raspbian OS is also working fine with WIFI.  
Is it needed to reconfigure the network or to run a script if network has to be changed after first and initial boot?

Here are two log files:

1. everythings seems to be working fine cable network connected:  
— start —

* * *

Initializing MusicBox…

* * *

Setting sound configuration…  
Probing sound devices:

- Found internal device: card0  
HDMI output detected
- Found internal device: card0  
HDMI output detected  
Selected card= (i2s= output=auto usb= intc=0)  
No output was specified/found, falling back to auto detection  
Selected card=0 (i2s= output=hdmi usb= intc=0)  
Using audio card0 (hdmi)  
MusicBox name is MusicBox  
Stopping Samba daemons: nmbd smbd.  
Starting Samba daemons: nmbd failed!  
Starting Spotify Connect : librespot.  
Starting daemon monitor: monit.  
Scanning music-files, please wait…  
INFO Starting Mopidy 1.1.2  
INFO Loading config from builtin defaults  
INFO Loading config from /etc/mopidy/mopidy.conf  
INFO Loading config from command line options

* * *

My IP address is 192.168.66.32  
Connect to me in your browser at [http://MusicBox.local](http://MusicBox.local) or [http://192.168.66.32](http://192.168.66.32)

* * *

— eof —  
2) after switchin network (WIFI configured in settings.ini and disconnected wired network):  
— start —

* * *

Initializing MusicBox…

* * *

Setting sound configuration…  
Probing sound devices:

- Found internal device: card0  
HDMI output detected
- Found internal device: card0  
HDMI output detected  
Selected card= (i2s= output=auto usb= intc=0)  
No output was specified/found, falling back to auto detection  
Selected card=0 (i2s= output=hdmi usb= intc=0)  
Using audio card0 (hdmi)  
MusicBox name is MusicBox  
ifup: interface wlan0 already configured  
Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).  
Reconfiguring network interfaces…RTNETLINK answers: No such process  
Internet Systems Consortium DHCP Client 4.2.2  
Copyright 2004-2011 Internet Systems Consortium.  
All rights reserved.  
For info, please visit [https://www.isc.org/software/dhcp/](https://www.isc.org/software/dhcp/)

Listening on LPF/eth0/b8:27:eb:55:1f:89  
Sending on LPF/eth0/b8:27:eb:55:1f:89  
Sending on Socket/fallback  
DHCPRELEASE on eth0 to 192.168.66.250 port 67  
send\_packet: Network is unreachable  
send\_packet: please consult README file regarding broadcast address.  
Reloading /etc/samba/smb.conf: smbd only.  
done.  
Stopping Samba daemons: nmbd smbd.  
Starting Samba daemons: nmbd failed!  
Waiting for network (1 of 4)…

Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).  
Reconfiguring network interfaces…done.  
Waiting for network (2 of 4)…

Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).  
Reconfiguring network interfaces…done.  
Waiting for network (3 of 4)…

Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).  
Reconfiguring network interfaces…done.  
Waiting for network (4 of 4)…

Running /etc/init.d/networking restart is deprecated because it may not re-enable some interfaces … (warning).  
Reconfiguring network interfaces…done.

* * *

ERROR: Timeout waiting for network to start.  
Check your network settings

* * *

Starting Spotify Connect : librespot.  
Starting daemon monitor: monit.  
Scanning music-files, please wait…  
INFO Starting Mopidy 1.1.2  
INFO Loading config from builtin defaults  
INFO Loading config from /etc/mopidy/mopidy.conf  
INFO Loading config from command line options  
RTNETLINK answers: Network is unreachable

— eof —

Hope this helps to support me.  
Very much thanks to you in advance

best regards,  
Andre

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [May 12, 2018, 9:57pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/8 "2018-05-12T21:57:58Z")

</div>

Hello Nick,

if you will get some time please find my update: [https://discourse.mopidy.com/t/using-wifi-does-not-allow-to-display-webcontent/2444?u=andre\_werner](https://discourse.mopidy.com/t/using-wifi-does-not-allow-to-display-webcontent/2444?u=andre_werner)

best regards

Andre

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [May 15, 2018, 5:21am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/9 "2018-05-15T05:21:18Z")

</div>

Hi there,

I’m sure this is a newbe issue by myself. Can anybody support?  
Thanks to all of you.

Andre

---

<div class="post-metadata">

**Author:** ![kingosticks](https://avatars.discourse-cdn.com/v4/letter/k/858c86/32.png) [@kingosticks](https://discourse.mopidy.com/u/kingosticks)\
**Post date:** [May 15, 2018, 2:02pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/10 "2018-05-15T14:02:10Z")

</div>

We support WPA/WPA2 wireless security. WEP is not secure and it’s unusual for someone to be using that, are you sure that’s what you have?

With WPA, you can either have a 64 hex digit (256-bit) pre-shared key or a 8-63 ASCII character passphrase that will be then converted into a 256-bit key. I don’t think WEP or WEP2 keys can be 64 characters long so it doesn’t make sense.

---

<div class="post-metadata">

**Author:** ![Andre\_Werner](https://avatars.discourse-cdn.com/v4/letter/a/cdc98d/32.png) [@Andre\_Werner](https://discourse.mopidy.com/u/Andre_Werner)\
**Post date:** [May 15, 2018, 5:33pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/11 "2018-05-15T17:33:14Z")

</div>

Hello,  
you are right. 63 ASCII characters are used for WPA/WPA2, but it’s still not working.  
Config of Fritzbox 7490

 ![2018-05-15%2019_23_14-FRITZ!Box%207490](https://canada1.discourse-cdn.com/flex036/uploads/mopidy/original/1X/219c4f244d5b31c8a24333810640f5bbbc0c090c.png)

What is ment with:

> Reconfiguring network interfaces…RTNETLINK answers: No such process

in the log file. Is this the reason why it’s not working?

What to do in this situation?

Thanks in advance  
Andre

---

<div class="post-metadata">

**Author:** ![elitau](https://yyz2.discourse-cdn.com/flex036/user_avatar/discourse.mopidy.com/elitau/32/997_2.png) [@elitau](https://discourse.mopidy.com/u/elitau)\
**Post date:** [October 7, 2018, 2:34pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/12 "2018-10-07T14:34:37Z")

</div>

I’ve solved it by changing the SSID and password to have no whitespaces and removed the country code.

---

<div class="post-metadata">

**Author:** ![Potter\_Teksmith](https://avatars.discourse-cdn.com/v4/letter/p/ecccb3/32.png) [@Potter\_Teksmith](https://discourse.mopidy.com/u/Potter_Teksmith)\
**Post date:** [December 23, 2018, 5:39am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/13 "2018-12-23T05:39:39Z")

</div>

Probably old and redundant but…  
Had a bit of hair-tearing here myself in getting wifi going on a Pi.  
What I found was that the SSID is case sensitive and the router wifi channel has to be 1 to 11 (mine had auto selected channel 13 so locking it down to a lower channel number made all the difference)

---

<div class="post-metadata">

**Author:** ![kingosticks](https://avatars.discourse-cdn.com/v4/letter/k/858c86/32.png) [@kingosticks](https://discourse.mopidy.com/u/kingosticks)\
**Post date:** [December 23, 2018, 10:29am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/14 "2018-12-23T10:29:50Z")

</div>

Wifi channels 12 and 13 are Europe specific and you must set your country for the wifi hardware to use them. There is a section in the config file about this:

```auto
# Optionally set the wifi region for correct regulatory configuration (available channels etc.)
# Use the ISO / IEC 3166 alpha2 country code, e.g. wifi_country = GB
wifi_country =

```

I stopped using channel 13 at home after I had a couple of wifi things that didn’t support it at all.

---

<div class="post-metadata">

**Author:** ![jjok](https://yyz2.discourse-cdn.com/flex036/user_avatar/discourse.mopidy.com/jjok/32/448_2.png) [@jjok](https://discourse.mopidy.com/u/jjok)\
**Post date:** [December 25, 2018, 11:38pm UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/15 "2018-12-25T23:38:22Z")

</div>

I spent a while trying to work this out when I was setting a Pi up a month or so back. The Raspberry Pi docs say (or said, at the time) that `country` was only needed for the Pi 3B+, but I my Pi Zero or Pi 2 wouldn’t connect without it.

---

<div class="post-metadata">

**Author:** ![kingosticks](https://avatars.discourse-cdn.com/v4/letter/k/858c86/32.png) [@kingosticks](https://discourse.mopidy.com/u/kingosticks)\
**Post date:** [December 26, 2018, 12:29am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/16 "2018-12-26T00:29:17Z")

</div>

Just to clarify, it’s nothing to do with specific hardware and everything to do with local regulations. If the docs for certain models didn’t mention it then that’s an omission. It’s quite rare you end up on those channels unless you specifically choose them, so most people don’t realise the config consequences.

---

<div class="post-metadata">

**Author:** ![jjok](https://yyz2.discourse-cdn.com/flex036/user_avatar/discourse.mopidy.com/jjok/32/448_2.png) [@jjok](https://discourse.mopidy.com/u/jjok)\
**Post date:** [December 26, 2018, 12:53am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/17 "2018-12-26T00:53:39Z")

</div>

Yeah, it specifically said in the docs “if you’re using a 3B+ you need to set country”. So I assumed I didn’t need to.

---

<div class="post-metadata">

**Author:** ![jodal](https://yyz2.discourse-cdn.com/flex036/user_avatar/discourse.mopidy.com/jodal/32/2651_2.png) [@jodal](https://discourse.mopidy.com/u/jodal)\
**Post date:** [February 19, 2026, 11:47am UTC](https://discourse.mopidy.com/t/using-wifi-does-not-work-raspberry-pi-3-model-b-rev-1-2-reconfiguring-network-interfaces-rtnetlink-answers-no-such-process/2444/18 "2026-02-19T11:47:02Z")

</div>

Closed on February 19, 2026, 11:47am UTC


