# Musibox with Hifiberry digi+ and philips MX6000i

**URL:** <https://discourse.mopidy.com/t/musibox-with-hifiberry-digi-and-philips-mx6000i/1206>\
**Category:** Pi MusicBox (archive)\
**Created:** [April 21, 2016, 7:47pm UTC](https://discourse.mopidy.com/t/musibox-with-hifiberry-digi-and-philips-mx6000i/1206 "2016-04-21T19:47:56Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![peter\_neyt](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@peter\_neyt](https://discourse.mopidy.com/u/peter_neyt)\
**Post date:** [April 21, 2016, 7:47pm UTC](https://discourse.mopidy.com/t/musibox-with-hifiberry-digi-and-philips-mx6000i/1206/1 "2016-04-21T19:47:56Z")

</div>

Hello ,

I have a DIGI+ with a RPI 2 and installed Musicbox on it. and want to connect it with the coax SPDIF interface to the Philips MX6000i Amp. which has a coax SPDIF input.

But have no sound .

When I Use my PC which has a SPDIF input I can play from the Musicbox so the installation and DIGI+ board is ok.

Other SPDIF sources , example sat receiver is working on the Philips MX6000i.

The MX6000i supports a max rate of 24bit/96Khz but think the DIGI+ wants to play on a higher rate than the MX6000i supports.

Is there a way to limit the digi+ / Musicbox or set the output to fixed 24bit/96Khz ?

Best regards,

Peter

---

<div class="post-metadata">

**Author:** ![jodal](https://yyz2.discourse-cdn.com/flex036/user_avatar/discourse.mopidy.com/jodal/32/2564_2.png) [@jodal](https://discourse.mopidy.com/u/jodal)\
**Post date:** [February 19, 2026, 11:47am UTC](https://discourse.mopidy.com/t/musibox-with-hifiberry-digi-and-philips-mx6000i/1206/2 "2026-02-19T11:47:27Z")

</div>